Select interface – FUJITSU fi-4750L User Manual

Page 80

Text mode
Original mode

7-12

14.Select Interface

1 Press “Next”

or “Previous”

and let the

scanner display Screen 54.

NOTICE

The screen 54 will appear oniy when the scanner has proper interface boards or option boards in the third
party slot.

2 At Screen 54, press

to select the

interface type. Press

if you want to

change the setting.

NOTICES

1. Normally, this setting does not have to be changed.

2. When an appropriate board is installed in the third party slot of the scanner, the scanner automatically

turns off the SCSI interface, activating the board in the third party slot. Screen 54 can be used to
forcibly change the selected interface. The selected interface is then forcibly changed.

3. The SCSI interface and the board installed in the third party slot cannot be used at the same time.

4. The default is Auto.

3 Press

to return.