FUJITSU fi-4750L - Manual (Page 15)

1-3
N o Function
Automatically feeds documents to the reading position.
Presses the documents loaded on the ADF paper chute.
Holds the documents to be fed by the ADF.
Displays the status of the scanner. Also displays buttons that enable the
operator to change settings in Feed mode, Manual Feed mode, and Setup
mode.
Opens/closes ADF to enable the removal of jammed documents.
Stacks the read documents.
Presses the document to the Document bed.
Closes over and keeps in place the document to be read.
Holds the document to be read. Also called Flatbed (FB).
Connects to an option.
Connects to the EXT connector.
A Fujitsu Video Interface Option Board is installed.
Connects to the host system with interface cables.
Connects to the INT connector.
Connects to an AC power outlet with the power cable.
Turns the power On or Off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16