Fluke Data Acquisition System/Data Logging System 2680A - Manual (Page 61)

Getting Started
Managing Your Network Using Fluke DAQ
51
Starting a Scan
You can scan for data using a configuration scan, a device scan, or by using Spy.
All scanning options are available in the Communication window.
Note
You must have channels configured for operation before starting a
scan.
Starting a Configuration Scan
To start a configuration scan
1. Click the on the Fluke DAQ toolbar and highlight the configuration in
the TreeView panel.
2. Click to start the scan. Click to stop the scan.
alg121s.bmp