Fluke Data Acquisition System/Data Logging System 2680A - Manual (Page 53)

Getting Started
Managing Your Network Using Fluke DAQ
43
Inserting and Configuring a Channel
After selecting a module, you need to add channels to the module.
To insert and configure a Channel
1. Highlight a module in the TreeView panel and click the Insert button.
alg112s.bmp
2. Specify the number of channels you want to insert on the Insert Channel
dialog box.
alg113s.bmp
3. Click OK. The channels are added to the module and appear in the TreeView
panel.
alg114s.bmp