Fluke Data Acquisition System/Data Logging System 2680A - Manual (Page 63)

Getting Started
Managing Your Network Using Fluke DAQ
53
Starting a Scan Using Spy
Spy triggers and collects its own measurements from up to eight channels from
any combination of devices. The data is not stored and the devices you are
checking do not need to be scanning.
To start a Spy scan
1. Click the on the Fluke DAQ toolbar. The Spy icon appears in the lowest
item in the TreeView panel.
2. Click the Spy icon and the Spy window appears. You may select up to 8
channels, including DIO and totalizer.
alg123s.bmp
3. Click to start the scan. Click to stop the scan.