FUJITSU fi-4860C - Manual (Page 80)

AP-19
■ Document separation force adjustment
If the following error occurs frequently, adjust the brake force of the Brake roller using
setup mode.
- Double-feed
- Mis-pick
- Paper jam1
1. Enter into the setup mode.
Please refer to the section "1.3 Basic Operations of the Operator Panel" on page 6
of the fi-4860C Operator’s Guide, "Using the setup and test mode."
The following screen appears.
Choose an appropriate setting based on the thickness of the document you are
scanning and the error.
By pressing
(Right arrow button), the LCD display changes items from (5) to (1).
By pressing (Left arrow button), the LCD display changes items from (1) to (5).
When the desired option appears, press (Enter button) to select it.
(1) - Document thickness: Thick
(2) - Document thickness: Medium thick
(3) - Document thickness: Medium
(4) - Document thickness: Medium thin
(5) - Document thickness: Thin
0 1 a t p ! i r a
= T h
S
T h i
e n o
k c i n