FUJITSU fi-4860C - Manual (Page 74)

AP-13
APPENDIX-2 CONSUMABLES AND
REPLACEMENT CYCLE
The following table lists the Part No. and the standard replacement cycle of the
consumables. It is recommended you stock extra consumables before the ones on the
scanner reaches end of life. The consumables must be replaced periodically. You can
check the number of scanned pages for the Pad ASSY, the Pick roller unit, the Brake
roller unit, and Print cartridge, and you can check the cumulative lamp-on time for the
Lamps by referring to each counter on this scanner.
The replacement cycle is based on the printing on Letter/A4 woodfree paper or wood
containing paper documents(64g/m
2
). The replacement cycle may differ due to paper
quality, print density or paper type.
For the purchase of the consumables, please contact the FUJITSU scanner dealer
where you purchased your scanner.
Descriptions Part No. Standard replacement cycle
Lamp PA83950-0290 1,000 Hours (60,000minutes)
Pad ASSY CA04315-G730 300,000 sheets or 1 year
Pick Roller Unit PA03296-F711 300,000 sheets or 1 year
Brake Roller Unit CA04315-F705 300,000 sheets or 1 year
Print Cartridge CA00050-0262 Black ink cartridge
40,000sheets (10 characters/sheet)
TTENTION
Use the correct Print cartridge. The Scanner may be dam-
aged if the wrong Print cartridge is installed.