FUJITSU fi-4860C - Manual (Page 65)

AP-4
■ Error mesage (Temporary error
:Check LED blinking
)
Check LED blinks when the following errors occur except and pick>.
The following messages are displayed if no documents are on
the hopper during the scanning opperation. Please place docu-
ments on the hopper. Scanning is continued, when placing doc-
uments on the hopper for re-scanning.
To clear this message, press the button.
HINT
Check LED does not blink at Hopper empty error.
(at Double feed)
HINT
"xxxx" shows the number of Batch counter value.
The following message displayed if a document is jammed in the
ADF.
Refer to “Operator guide” included in “User manual CD-ROM”
for removing the document remained in the scanner.
HINT
One of "1" - "8" is displayed instead of "x", depending on
paper jam status.
p e r E
x x x x
m p
x
P a t y
D u e l o b F e d e x x x x x
p e r E m p P a t y
p e r J a m P a x