Fisher & Paykel DS602I - Manual (Page 7)

SECTION 2 FITTING THE DISHDRAWER
Ensure the cavity is at
least 22 7 /
8
" (580mm) deep.
TIP
STEP 2.1 DISHDRAWER MOUNTING HOLE LOCATIONS
2.1.1
Draw the cavity center line on the
supporting cabinetry.
2.1.2
Center Template in cavity using V-notch
on the front of the Template.
2.1.4
Mark and drill four 15 /
32
" - 9 /
16
"
(12mm-14mm) diameter holes as
described on Template.
2.1.3
Align front of Template to suit surround of
cabinetry.
IMPORTANT
For Integrated product
with door thickness other
than 3 /
4
” (18mm), the
Template position must be
adjusted forward or back
to allow for this
difference.
Page DS_06