Fisher & Paykel DS602I - Manual (Page 14)

Accuracy is essential
when cutting the Badge
Mounting Hole to ensure
a neat fit to hold the
badge.
IMPORTANT
IMPORTANT
All marking out to be
done on the back surface
of the Drawer Front.
When mounting the
handle, ensure fastenings
do not protrude beyond
the back surface of the
Drawer Front.
I
N
T
E
G
R
A
T
E
D
P
R
O
D
U
C
T
O
N
L
Y
Page DS_13
IMPORTANT
4.1.3
Control Badge Position
Badge can be located anywhere within the Mounting Zone shown. Handle position will need
to be taken into account.
4.1.4
Badge Cutout Dimensions
Cut out Badge Mounting Hole in the chosen position (see Control Badge Mounting Zone on
diagram above). A Control Badge Template (Part No. 526253) is available on request from
Fisher & Paykel or alternatively, a Template can be found on the Mounting Bracket enclosed
with the product.
The Badge Mounting Hole is an ellipse shape.