beautypg.com

Removing the expansion module – HP 339820-002 User Manual

Page 40

background image

Removal and replacement procedures 40

4.

Secure the console switch to the rails using the appropriate number of M-6 screws.

Removing the expansion module

1.

Disconnect all cabling.

NOTE: Identification labels are provided on the UTP CAT5 cables to mark the ports to which they are

connected.

2.

Remove the expansion module from the rack.

If the expansion module was Velcro-mounted, pull the expansion module away from the rack.
-or-

See also other documents in the category HP Computer Accessories: