Harmony House 802.11a - Manual (Page 57)

Harmony Utility 57
In addition, the utility displays the current success rate in the Instantaneous Success
field and the average success rate (since the beginning of the test) in the Average
Success field.
By default, the adapter uses a packet size of 500 Bytes and automatically switches
between all rates as necessary during the test (greater range generally means a lower
transfer rate). However, you can also specify a transfer rate and/or a packet size
(between 1 and 1500 Bytes) using the drop-down menu. If you change either the
Transfer Rate or the packet size, click
Apply for these changes to take effect. Click
Close to exit the Packet Transmission Success Rate screen.
Note: You can only perform a transmission test with an Access Point; you cannot
perform a transmission test with an Ad Hoc node.
Version Information
Click the About tab to view version information for the 802.11a driver and utility.