Security, Wep for authentication and encryption – Harmony House 802.11a User Manual
Page 42
Harmony Utility
42
Security
Click the
Security tab to configure the adapter’s security settings. From within this
screen, you can enable WEP for Authentication and Encryption, enable the Harmony
Security Protocol, and configure the adapter’s WEP Keys. See “Security Options” on
page 32 for more information on these settings.
WEP for Authentication and Encryption
Follow these steps to enable WEP for Authentication and Encryption:
1.
Select
Use WEP for Authentication and Encryption from the Security Level box,
shown below.
2.
Click
Configure WEP Keys.
3.
Select a
Key Size from the drop-down menu (64 Bit, 128 Bit, or 152 Bit).