Upgrading to version 1.4 – Harmony House 802.11a User Manual
Page 22
Installation
22
Upgrading to Version 1.4
If you already have an earlier version of the Harmony 802.11a software installed,
follow these steps to upgrade to version 1.4:
1.
Insert the Harmony Installation CD into the CD-ROM drive. If you do not have a
CD that contains software version 1.4, you can download the software from
Proxim’s Web site at
http://www.proxim.com/support/.
2.
Double-click
SETUP.EXE to begin the software upgrade.
3.
Click the
Upgrade button when prompted that the Harmony 802.11a Utility is
already installed on the computer, as shown below.
4.
When prompted, click
OK to restart the computer.
After the computer reboots, the Harmony 802.11a network adapter will be using
software version 1.4.