Forno 30 Inch Single Electric Wall Oven Installation Guide - Manual (Page 16)

15
STEP 7 - COMPLETE INSTALLATION
1. Check that all parts are now installed. If there is an extra part, go back through
the steps to see which step was skipped.
2. Dispose of/recycle all packaging materials.
3. Check Operation of Oven.
•
Turn on power.
•
Press BROIL.
•
Set the temperature.
•
Press START.
NOTE: If oven(s) does not operate, check the following:
•
Household fuse is intact and tight; or circuit breaker has not tripped.
•
Electrical supply is connected.
•
See “Troubleshooting” section in the User Manual.
4. When oven has been on for 5 minutes, feel for heat. If you do not feel heat or if
an error message appears in the display, turn off the oven and contact a qualified
technician.
5. Press CANCEL to turn off the oven.
IMPORTANT: For oven use and cleaning, read the User Manual.