Gefen EXT-MFP Audio/Video Multi-Format Processor - Manual (Page 164)

page | 154
#set_color_balance
Sets the picture color balance. This commands can only be used when setting the
#set_color_temp command to USER. The default value for all color channels is 50.
Syntax
#set_color_balance param1 param2
Parameters
param1 Integer [0 ... 2]
param1 Description
0 Red Channel
1 Green Channel
2 Blue Channel
param2 Integer [0 ... 100]
Examples
#set_color_balance 0 45
PICTURE COLOR BALANCE RED CHANNEL SET TO 45
If Color Temperature is not set to USER, then the following feedback will be produced:
#set_color_balance 0 45
COLOR TEMP IS NOT USER!!!
Related Commands
#set_color_temp
#get_color_balance
A
dv
anc
ed Oper
ation
Commands
A
dv
anc
ed Oper
ation