Fixed color wheel filter removal and installation, Rotating gobo removal and installation – VARI-LITE VL6000 Beam User Manual
Page 92
VARI
❋
LITE - VL6000 B
EAM
L
UMINAIRE
U
SER
’
S
M
ANUAL
74
27 April 2017
02.9708.0002
Fixed Color Wheel Filter Removal and Installation
Fixed color wheel filters in the VL6000 are glued into the color wheel. Filters cannot be removed and
installed while bulkhead is in the fixture.
Rotating Gobo Removal and Installation
CAUTION:
VL6000 Beam Luminaires accept glass gobos only. Use of metal gobos in these
luminaires may damage gobo assembly and will void the luminaire warranty.
WARNING:
Remove power from luminaire and allow luminaire to cool completely before
performing this procedure.
To remove and replace rotating gobos:
Step 1. Remove power from luminaire.
Step 2. Remove head cover assembly as indicated in by loosening four captive screws and lifting
cover away from luminaire head.
Note:
Note: head cover is attached by a safety tether.
Figure A-4: Replacing Rotating Gobos
Luminaire Head
Head Cover Assembly
to access Color Wheel 1*
Assembly
Color/Gobo Assembly
* Each head cover is secured with a tether.
Captive Phillips
Screws (x4)
Pan Lock