VARI-LITE VL6000 Beam - Manual (Page 44)

VARI ❋ LITE - VL6000 B EAM L UMINAIRE U SER ’ S M ANUAL
26 27 April 2017 02.9708.0002
Figure 2-10: Safety Cable Installation / Luminaire Hanging
Step 4. Make sure tilt and pan locks are disengaged so luminaire moves freely.
Step 5. Connect power and data cables according to procedure given in
“Connecting Data and
Power” on page 28 .
When hanging the luminaire in a side hang position, orient the enclosure as shown in Figure 3 . Natural
convection and the designed direction of the inlet and exhaust cooling fans dictate that the inlet should
be closest to the floor and the exhaust should be towards the ceiling. This eliminates the possibility of
23.8”
(60.5 cm)
23.8”
(60.5 cm)
24.5”
(62.2 cm)
25.9”
(65.9 cm)
NOTE: The safety cable anchor point is tested and is in compliance
of the following safety standards:
- IEC / EN 60598-2-17.6.6
- UL1573
Safety Cable Anchor Point
(see note)
Note, truss hooks shown are sold separately. Truss and pipe by others.
Safety Cable Anchor Point
Safety Cable: Recommended for hanging installations. May be required by local codes. Safety cable is sold
separately.
Câble de sécurité: Recommandé pour les installations pendaison. Peut être exigé par les codes locaux.
Câble de sécurité est vendu séparément.