VARI-LITE VL6000 Beam User Manual
Page 38

VARI
❋
LITE - VL6000 B
EAM
L
UMINAIRE
U
SER
’
S
M
ANUAL
20
27 April 2017
02.9708.0002
Step 6. As shown in
, align lamp tabs with lamp socket.
Figure 2-3: Lamp Installation
Step 7. Install lamp fully into lamp socket, taking care not to touch lamp glass.
Step 8. Turn lamp clockwise to seat lamp into socket. Lamp base should be aligned as illustrated in
.
Figure 2-4: Installed Lamp
Step 9. Reinstall lamp socket cover. Make sure safety tether is completely encapsulated within lamp
socket cover.
Step 10. Disengage tilt lock to allow luminaire head to move freely.
Step 11. Align lamp as described in
“Align Lamp For Maximum Beam Irradiance” on page 21
Lamp Socket Cover
Lamp*
Align tabs of lamp with
socket when installing
Note alignment of
Lamp
Ensure lamp is completely
seated before reinstalling lamp
socket cover.
fully seated lamp