Lumantek ez-Pro VS10 3G-SDI/HDMI Video Switcher with 5" LED Touchscreen User Manual
Page 19

Revision Number: 2.0.0
Distribution Date: Dec. 2019
Copy Rights
Copyright © 2006~2019 LUMANTEK Co., Ltd.
All Rights Reserved
This document contains information that is proprietary to LUMANTEK.CO., LTD. The information
in this document is believed to be accurate and reliable; however, LUMANTEK assumes no
responsibility or liability for any errors or inaccuracies that may appear in this document, nor for
any infringements of patents or other rights to third parties resulting from its use.
This publication may contain technical issues, inaccurate information or typos. These will be revised
in revised edition, if there is any. No part of this publication is subject to be reproduced, stored in
retrieval system, or transmitted in any forms, or any means without the prior consent by Lumantek.
Trademarks
HD ENCODULATOR TM, SD ENCODULATOR TM LUMANTEK Logo, Mega CruiserTM, ORIXTM,
X-CruiserTM, DTA-PlusTM, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd.
Any other trademarks than stated above in this document belongs to its pertinent corporation.
Warranty Period
Lumantek’s products comes with One(1) year limited warranty. Please contact below if you need
more information.
LUMANTEK CUSTOMER SERVICES
TEL : +82-2-6947-7429
FAX : +82-2-6947-7440
Installation Precautions
This page states the safety measures the users must take to avoid circumstances where the system
may occur physical damages or injuries. Please THOROUGHLY go over this page before the system
installation/operation.
General Precautions
• Maintain dust FREE condition during and after System Installation/Operation.
• Please place the system cover in a safe location when opened.
• Securely stow tools and cables away from the passages.
• Avoid wearing loosened clothes or accessories during installation/Operation.
• Avoid any unnecessary actions that may damage/harm system or personnel.
• Do NOT open the system unless advised by Lumantek representative. Lumantek takes
no responsibility on units with broken RMA seals.
Power Precautions
• Please check cable overload before connecting the system to the power supply.
• Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.
• Avoid operating on wet floors. Make sure power extension cables, floors, and instruments
are grounded and in a safe operating condition.
• Please discharge static electricity by touching grounding metals before starting
hardware installation.
• The grounding parts must be disassembled last.
• Manufacturer takes no responsibilities on Direct/Indirect losses or damages
due to use of inappropriate parts or services by unauthorized service provider
• Supplying power during the system installation may cause damages to the system and personnel.