Photogenic Professional Lighting Matrix MCD400R Monolight with Ion Inverter, Beauty Dish, Grid, and Stand - Manual (Page 7)

P a g e 7 | 16
7.4 2.4G Built-in Radio Receiver
a. When the studio flash is at page “cx”, press SLAVE button once to enter into radio channel
setup page “Fx”. (Fig. 11A & 11B)
Press SLAVE once
b. There are 16 different channels for your choice from F0, F1, F2, F3 to FF. Press UP/DOWN
button to select proper receiver channel (Fig. 12A & 12B).
c. The MATRIX flash includes an MRT-16, which is a basic 16 channel radio transmitter. For
additional remote control functionality, you need to purchase an optional MCD-TXC (included
with kits).
d. When the Matrix and the radio transmitter are at the same channel, the flashes can be
triggered. The following table shows how to coordinate codes between radio transmitter and
receiver.
Figure 11A Figure 11B
Figure 12A Figure 12B