BenQ PD2725U DesignVue Designer 27" 16:9 HDR 4K IPS Monitor User Manual
Page 70
70
Navigating the main menu
Video Input
Presets a video input to go with the USB Upstream port.
See
Setting up the second video source for KVM Switch
If
None
is selected from
KVM Switch
>
Video Input
for
Scenario A: Working with two computers and one monitor on
page 50
and
USB Upstream
is selected for KVM Switch, the
screen does not display anything from the second source as there
is none. You cannot control the current display (from
Thunderbolt™ 3 or USB-C™, depending on your purchased
model) either as the keyboard and mouse control has been
switched away. In this case, select a video input manually from
Input
>
Signal Input
.
•
DisplayPort
•
HDMI1
•
HDMI2
•
None
Auto Switch
(PD2720U /
PD3220U /
PD3420Q only)
Once enabled, if USB or Thunderbolt™ 3 (PD2720U /
PD3220U) / USB-C™ (PD3420Q) cable is disconnected,
the USB input source and the control will be switched to
the other computer automatically.
•
ON
•
OFF
KVM Auto
Switch
(PD2725U only)
Once enabled, if USB or Thunderbolt™ 3 cable is
disconnected, the USB input source and the control will be
switched to the other computer automatically.
•
ON
•
OFF
Item
Function
Range