BenQ PD2725U DesignVue Designer 27" 16:9 HDR 4K IPS Monitor - Manual (Page 58)

58 Navigating the main menu
Item Function Range
Signal
Input Use this to change the input to that appropriate to your
video cable connection type.
Manual selection of signal input will disable the source switch
function of KVM Switch . If you prefer to use KVM Switch after
manual source selection here, be sure follow the instructions in
Setting up the second video source for KVM Switch before use on
page 49
again to set properly.
(PD2720U /
PD2725U /
PD3220U)
•
Thunderbolt
3
• DisplayPort
• HDMI1
• HDMI2
(PD3420Q)
•
USB-C
• DisplayPort
• HDMI1
• HDMI2
PIP Sets the PIP mode. Pictures from two independent video
sources are displayed on the screen at the same time.
The audio input is from the main source if the PIP mode is
activated.
Not available when HDR function is enabled.
Main Determines the main video source. (PD2720U /
PD2725U /
PD3220U)
•
Thunderbolt
3
• DisplayPort
• HDMI1
• HDMI2
(PD3420Q)
•
USB-C
• DisplayPort
• HDMI1
• HDMI2
Sub Determines the second video source for PIP
mode.
PIP Size Determines the size of the inset window in the
PIP mode.
• Small
• Medium
• Large
PIP
Position Adjusts the position of the inset window in the
PIP mode. • Top Right
• Top Left
• Bottom Right
• Bottom Left