KEPCO TMA VXI-27 - Manual (Page 36)

TMA VXI -27 101602
3-19/(3-20 Blank)
FIGURE 3-7. EXPANSION OF QUESTIONABLE REGISTER FOR MULTIPLE LOGICAL INSTRUMENTS
3.5.10 PROGRAM EXAMPLE
Appendix F is a sample program illustrating communication with the TMA VXI-27. The sample
program is written in C language for a National Instruments embedded slot 0 controller using
LabWindows. Although the program is for a specific manufacturer’s hardware, the techniques
for other manufacturers are similar.
The program illustrates:
• how to communicate to the register level
• how to use the Word Serial Protocol
• how to use the interrupt capabilities of the TMA VXI-27, even though they are not used in
the LABVIEW library.
3.6 CIIL PROGRAMMING
The CIIL command language is used on early models of Kepco power supplies and controllers.
The command functions are included here for compatibility with other equipment programmed
with CIIL commands. The CIIL command set for the TMA VXI-27 Controller is defined and
explained in Appendix D.
3.7 CALIBRATION
The TMA 4882-27 requires no calibration.
3.8 MAINTENANCE
No preventive or scheduled maintenance is requuired.