KEPCO TMA VXI-27 - Manual (Page 12)

TMA VXI-27 040507
1-3
.
FIGURE 1-2. TYPICAL CONTROLLER TO POWER MODULE INTERFACE
1.5 ACCESSORIES
Table 1-2 lists the accessories for the TMA VXI-27 Controller.
TABLE 1-2. ACCESSORIES
ACCESSORY PART NUMBER USE NOTE
Cable - two 9-pin connec-
tors, ~ 6 ft. (2 m)
118-0844
Daisy chain TMA 4882-27and Kepco Power Sup-
plies with 9-pin connector on IEEE 1118 bus. Supplied
15 -Pin
Connector 142-0276
(Amp P/N 205206-1)
Mating Connector for AUXILIARY SIGNALS con-
nector Supplied
Hood 108-0204
(Amphenol P/N 17-2588-6)
Used with 15-Pin Connector Supplied
Snap-in 107-0187
(Amp P/N 66504-2)
Used with 15-Pin Connector Supplied
Terminator, 9-pin 195-0086 Terminate IEEE 1118 bus daisy chain Supplied
Terminator,
5-pin 195-0075 Terminate IEEE 1118 bus daisy chain (for MAT
power supply with 5 pin round connector) Not
supplied
Cable - two 5-pin connectors
118-0699
Daisy chain Kepco Power Supplies with 5-pin con-
nectors on IEEE 1118 bus. Not
supplied
Cable - one 5-pin and one 9-
pin connector, ~6 ft. (2 m) 118-0749 Daisy chain TMA VXI-27 and Kepco Power Supplies
with 5-pin connector on IEEE 1118 bus. Not
supplied
Cable - one 5-pin and one 9-
pin connector, ~12 ft. (4 m)
118-0852
Daisy chain TMA VXI-27and Kepco Power Supplies
with 5-pin connector on IEEE 1118 bus. Not
supplied
Cable - two 9-pin connec-
tors, ~ 12 ft. (4 m)
118-0853
Daisy chain TMA VXI-27and Kepco Power Supplies
with 9-pin connector on IEEE 1118 bus. Not
supplied