Main menu – Irritrol Climate Logic User Manual
Page 7
Receiver Module Installation and Setup
7
4. The Receiver Module will automatically* synchronize time
and date with the host controller upon initial power-up.
*Note: Does not apply to TMC-212 controller.
5. Verify that the time and date are synchronized correctly.
If necessary, adjust the Receiver Module as follows:
Note: The display will automatically return to the Home screen
if a key is not pressed within 60 seconds.
• Press the
MENU
key to display the Main Menu screen.
(The
CLOCK
menu option is selected by default.)
• Press the
ENTER
key to display the Clock review screen.
• Press the
SETUP
key to display the Set Clock screen.
Note: To download the current time and date from the control-
ler, press the
GET
key. When prompted, press the
YES
key. .
• Press the
or
key to adjust the selected (underscored)
value. Press the
NExT
key to select the next value. Continue
setting the current day, year and time.
Note: To change the clock time display format, press the
12/24
key. To return to the previous screen without making changes,
press the
CANCEL
key.
• When the Receiver Module and controller are synchronized
to the current time and date, press the
SAVE
key.
• Press the
ExIT
key two times to return to the Home screen.
Main Menu
Clock
Location
Setup
Timer
Remote
Utility
Sensor
EXIT
ENTER
Clock
03/15/2011 02:06P
EXIT
SETUP
GET
Set Clock
03/15/2011
02:06P
SAVE
MONTH
CANCEL
12/24
NEXT
CL User Guide Final Edit.indd 7
2/11/11 5:19 PM