Irritrol Climate Logic - Manual (Page 18)

18
Weather Sensor Identification Feature
Weather Sensor Identification Feature
Within the Sensor Setup screen, the Weather Sensor ID can be
easily viewed, and pairing removed/replaced as needed.
• From the Home screen, select the Main Menu Sensor option
( MENU_SENSOR_ENTER). The ID number of the currently
paired Weather Sensor will be displayed.
• To remove and replace the currently-paired Weather Sensor,
press the REMOVE key to display the Remove Sensor screen.
Important: A new Weather Sensor must be activated before it
can be paired with the Receiver Module. See page 9 for details.
• Press the YES key the display Sensor Setup/Add Sensor screen.
• Press the ADD key to initiate the sensor ID search function.
• Press and release the Weather Sensor Test Pin to “Ping” the
Receiver Module. When pairing is successful, the 7-digit sensor
ID is displayed.
Sensor Setup
ET Sensor ID: 0123456
Successful
Sensor Found
EXIT
Sensor Setup
Add Sensor
EXIT ADD
REMOVE SENSOR?
NO YES
Sensor Setup
ET Sensor ID: 0065157
EXIT REMOVE VIEW
CL User Guide Final Edit.indd 18 2/11/11 5:19 PM