ATL Telecom AM2048 - Manual (Page 18)

ATL TELECOM USER GUIDE
AM2048A
33
6.1 END TO END DELAY
The transit delay from one end of the system to the other is < 700uS.
6.2 JITTER
For G.703 interfaces, the jitter meets the requirements of TBR12 and TBR13.
These measurements are performed in the presence of the maximum tolerable input jitter.
6.3 TRANSMISSION RANGE
6.3.1 2-Pair Noise Free Range on 0.4mm Wire
6.3.2 1-Pair Noise Free Range on 04mm Wire
SPEED NOISE FREE RANGE ATTENUATION
2048kbps 4.4km 46.8dB @150kHz
1536kbps 4.75km 50.5dB @150kHz
1024kbps 5.3km 55.3dB @150kHz
768kbps 5.6km 59.9dB @150kHz
512kbps 6.2km 66.2dB @150kHz
SPEED NOISE FREE RANGE ATTENUATION
2048kbps 5.3km 56.4dB @ 150kHz
Measurement Filter Bandwidth Output Jitter
Lower Cut Off (High Pass) Upper Cut Off (Low Pass) UI Peak to Peak (maximum)
40Hz 100kHz 0.11
6 T R A N S M I S S I O N P E R F O R M A N C E
6
32 ATL TELECOM USER GUIDE
AM2048A