Microsens MS453522M - Manual (Page 7)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
2
1. Introduction
1-1. Overview of 8 Port Gigabit Ethernet Switch
8-port Gigabit L2 Managed Switch, is a standard switch that meets all IEEE 802.3/u/x/z
Gigabit, Fast Ethernet specifications. The switch included 6-Port 10/100/1000Mbps TP and 2-Port
Gigabit TP/SFP Fiber management Ethernet switch. The switch can be managed through RS-232
serial port via directly connection, or through Ethernet port using CLI or Web-based
management unit, associated with SNMP agent. With the SNMP agent, the network
administrator can logon the switch to monitor, configure and control each port’s activity in a
friendly way. The overall network management is enhanced and the network efficiency is also
improved to accommodate high bandwidth applications. In addition, the switch features
comprehensive and useful function such as QoS (Quality of Service), Spanning Tree, VLAN, Port
Trunking, Bandwidth Control, Port Security, SNMP/RMON, IGMP Snooping capability via the
intelligent software. It is suitable for both metro-LAN and office application.
In this switch, Port 7 and Port 8 include two types of media --- TP and SFP Fiber (LC, BiDi
LC…); this port supports 10/100/1000Mbps TP or 1000Mbps SFP Fiber with auto-detected
function. 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion.
⎯ 1000Mbps LC, Multi-Mode, SFP Fiber transceiver
⎯ 1000Mbps LC, 10km, SFP Fiber transceiver
⎯ 1000Mbps LC, 30km, SFP Fiber transceiver
⎯ 1000Mbps LC, 50km, SFP Fiber transceiver
⎯ 1000Mbps BiDi LC, 20km, 1550nm SFP Fiber WDM transceiver
⎯ 1000Mbps BiDi LC, 20km, 1310nm SFP Fiber WDM transceiver
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit,
Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver is a Gigabit Ethernet port that fully
complies with all IEEE 802.3z and 1000Base-SX/LX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic Wavelength
Division Multiplexing (WDM) technology that transports bi-directional full duplex signal over a
single fiber simultaneously.
For upgrading firmware, please refer to the Section 3-21 or Section 4-2-2 for more details.
The switch will not stop operating while upgrading firmware and after that, the configuration
keeps unchanged.