Microsens MS453522M - Manual (Page 127)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
122
3-16. Alarm Configuration
Function name:
Events Configuration
Function description:
The Trap Events Configuration function is used to enable the switch to send out the trap
information while pre-defined trap events occurred. The switch offers 24 different trap
events to users for switch management. The trap information can be sent out in three ways,
including email, mobile phone SMS (short message system) and trap. The message will be
sent while users tick ( ) the trap event individually on the web page shown as below.
Parameter description:
Trap: Cold Start, Warm Start, Link Down, Link Up, Authentication
Failure, User login, User logout
STP: STP Topology Changed, STP Disabled, STP Enabled
LACP: LACP Disabled, LACP Enabled, LACP Member Added, LACP Port Failure
GVRP: GVRP Disabled, GVRP Enabled
VLAN: VLAN Disabled, Port-based VLAN Enabled, Tag-based VLAN
Enabled, Metro-mode Vlan Enabled, Double-tag Vlan Enabled
Module Swap: Module Inserted, Module Removed, Dual Media Swapped
Events Configuration
Email/SMS Configuration
Alarm Configuration