Microsens MS453522M - Manual (Page 56)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
51
3-2-2. Port Configuration
Port Configuration is applied to change the setting of each port. In this configuration
function, you can set/reset the following functions. All of them are described in detail below.
Fig. 3-12
Function name:
Port Configuration
Function description:
It is used to set each port’s operation mode. The switch supports 3 parameters for each port.
They are state, mode and flow control.
Parameter description:
State:
Set the communication capability of the port is Enabled or Disabled. When enabled,
traffic can be transmitted and received via this port. When disabled, the port is
blocked and no traffic can be transferred through this port. Port State is configurable
by the user. There are only two states “Enable” and “Disable” able to choose. If you
set a port’s state “Disable”, then that port is prohibited to pass any traffic, even it
looks Link up.
Default: Enable.