Leprecon AI-512 - Manual (Page 5)

1.3 Wall boxes
Litescape series II panels are designed to fit into Raco 690 series wall boxes. To specify the
correct box size, use the following table:
Panel type Part Number Inside gang
space
Outside
gang space
Lockout 90-03-6101 1 2
1 Fader 90-03-6114 1 2
3 fader 90-03-6115 2 3
6 fader 90-03-6116 3 4
12 fader 90-03-6117 5 6
1 button 90-03-6114 1 2
3 button 90-03-6115 1 2
6 button 90-03-6106 2 3
12 button 90-03-6108 3 4
3 button / 3 fader 90-03-6110 3 4
3 button / 3 fader / lockout 90-03-6111 4 5
6 button / 6 fader 90-03-6112 5 6
6 button / 6 fader / lockout 90-03-6113 6 7
'Inside gang space' is the box size needed to mount the specific panel.
Because the panel edges overlap the box, the outside gang space is 1 gang larger.
If more than one panel is to be mounted in a single box, this oversize panel must be taken into account. Add
the outside gang space for the panels, and subtract 1 to determine the back box size.
This does not apply if only one panel is mounted in a box.
5