Leprecon AI-512 - Manual (Page 25)

The table at the top of the screen shows current mapping; which incoming DMX channels can control specific
playbacks. Click on the red X at the end of the line to delete a specific assignment.
The dialog box at the bottom of the screen is used to add a new DMX control channel.
DMX channels take control of a panel playback with a 'match and grab' system. You must take the DMX value
from the desk up to the value of the playback, which captures the playback. You can then adjust the level of the
playback with the desk fader.
Changing the playback from a wall panel re-establishes panel control of the playback, releasing the DMX fader until
it again matches.
25