ifm electronic RN3001 - Manual (Page 15)

UK
Encoder with Profibus interface
15
10.1.3 Required resolution
Parameter selection of
– resolution per revolution
– or max� total resolution
– code sequence
– Class 2 functionality
– scaling function
Selection required resolution
Resolution per revolution
The position value is scaled so that it increases by the number of the required
measuring steps during one revolution�
In addition the [Total mesuring range] parameter is evaluated via which the
measuring range can be adapted (→ chapter 9.2.5)
Resolution per max� total resolution
The requested measuring steps entered refer to the total measuring range�
The device provides the configured number of measuring steps via the total
(physical) number of revolutions�