Baby Lock Crown Jewel II (BLCJ18-2) Manual - Manual (Page 10)

3
Baby Lock Crown Jewel II
Safety Section
NOTE: Do not operate your Baby Lock Crown Jewel II quilt-
ing machine until you have completely read the information
contained in this manual. Please keep all packaging and order
information for warranty purposes.
1.
Always unplug the Baby Lock Crown Jewel II from the
electric outlet when performing any maintenance, chang-
ing the needle, removing thread locks, or when left unat-
tended.
2.
Keep fingers away from all moving parts. Use caution
around the needle or sharp external components.
3.
Change the needle often. Do not use bent or dull
needles.
4.
Switch the power off when making any adjustments in
the needle or bobbin area, such as threading the needle,
installing the bobbin case, oiling or when cleaning.
5.
Never drop or insert foreign objects into any opening.
6.
The Baby Lock Crown Jewel II should only be used in-
doors away from moisture.
7.
The Baby Lock Crown Jewel II should not be stored or
used in extreme temperatures.
8.
Use the Baby Lock Crown Jewel II only for its intended
use as described in this manual.
9.
Use only attachments recommended by the
manufacturer in this manual.
10.
To disconnect from the wall outlet, push the switch to
the off position, then remove the plug from outlet pull-
ing from the plug, not the cord. Never operate the Baby
Lock Crown Jewel II if the cord is damaged in any way. If
a mechanical or electrical problem is encountered, please
consult local authorized Baby Lock retailer.
Home Machine
Quilting Frame
Recommendation
•
Baby Lock Pearl Frame
•
Baby Lock Momentum Frame
•
Baby Lock Majestic Frame