American Time Wireless Audio Generator - Manual (Page 9)

9
© American Time
Wireless Audio Generator
Installation Manual
Application
Examples
Operation
Intr
oduction
Application Examples
A. Example of a Scheduled School Bell Tone between Classes
One of the most common applications for the Wireless Audio Generator is for schools to play a custom school bell tone or alert
between classes. In this example the school staff would do the following steps to set up the Wireless Audio Generator:
1. Make the connections between the Wireless Audio Generator and the PA system.
2. Select or create an MP3 file which sounds like a school bell (1.mp3). This should be the only MP3 file saved on the USB drive.
3. Plug the USB drive into the Wireless Audio Generator.
4. Put the Manual Activation Switch in the AUTO position.
5. Put the Power Switch in the ON position.
6. Set up the triggering Events and Circuits in the SiteSync IQ system controller.
n
Note: The suggested duration to trigger an MP3 file is 3 seconds.
Event Setup in Remote Connect
Circuit Setup in Remote Connect
The Wireless Audio Generator will play the school bell tone
(1.mp3) to indicate the beginning of class at the following
times:
• 8:00 a.m.
• 9:00 a.m.
• 10:00 a.m.
• 11:00 a.m.
• 12:00 p.m.
• 1:00 p.m.
• 2:00 p.m.
The Wireless Audio Generator will also play the school bell tone
(1.mp3) to indicate the end of class at the following times:
• 8:57 a.m.
• 9:57 a.m.
• 10:57 a.m.
• 11:57 a.m.
• 12:57 p.m.
• 1:57 p.m.
• 2:57 p.m.