American Time Wireless Audio Generator - Manual (Page 6)

© American Time
6
Wireless Audio Generator
Installation Manual
Operation
Application Examples
Operation
Intr
oduction
Power and Manual Activation Switch Operation
The front of the Wireless Audio Generator also contains a Power switch and a three-way Manual Activation switch. See Figure 1.
The
Power switch has a red LED indicator which is illuminated when in the ON position.
n
Note: Once power is applied and the Power Switch is in the ON position it may take 10 to 20 seconds for the Wireless Audio
Generator to fully power up and be ready to play the MP3 files.
The
Manual Activation Switch may be used to manually trigger and play the MP3 files. This switch has three positions; ON,
AUTO, OFF.
ON
AUTO
OFF
When this switch is in the ON (upper) position the Wireless Audio Generator will trigger and start to play the
MP3 files. The MP3 files will continue to play through all of the MP3 files as long as this switch is in the ON
position.
Once this switch is placed in the ON position and then back to the AUTO position, the Wireless Audio
Generator will finish playing the MP3 file it had started when the switch was first placed in the ON position.
The MP3 file will only stop playing when the switch is placed in the OFF position.
AUTO Position
When this switch is in the AUTO (middle) position the Wireless Audio Generator will only play an MP3 file if
triggered wirelessly by the SiteSync IQ system controller.
n
Note: This switch should be left in the AUTO position for normal operation.
OFF Position
As long as this switch is in the OFF (lower) position the Wireless Audio Generator will not play any MP3 file,
even if triggered wirelessly from the SiteSync IQ system controller. Once this switch is placed in the OFF
position, any MP3 currently playing will stop immediately.