Ivie IE-35 RTA - Real Time Analysis - Manual (Page 17)

Ivie IE-33 & IE-35 Manual
page 17
RTA Cursor
To display the cursor, tap the
"Start/Stop" button to freeze the
display then use the Left/Right
Joystick to position the cursor.
Only the cursor selected in the
menu will be displayed. If the
Peak Cursor is not selected, the
RTA cursor will be shown.
The "Frequency Detect" will
show the frequency of the FFT
Bin in which the highest
amplitude occurs. This is
extremely helpful when using a
parametric equalizer to EQ
feedback frequencies.
RTA/Peak Hold Curves, Stopped
with Peak Hold Cursor diplayed. RTA/Peak Hold Curves, Stopped
with RTA Cursor diplayed.
There are many display options in
the "Max Res" mode. Along with
the RTA curve, the Peak Hold
curve can also be displayed.
TO CLEAR THE "PEAK HOLD"
curve tap the "Clear Button."
DISPLAY of Cursor Frequency and
Level.
Peak Hold & RTA Curves RTA Curve with Frequency
Detection display "On"
RTA Curve
Options
Options
Options
Options
Options
Options Options
RTA: Peak Curves, Freq. Detection