Lingenfelter EFILive AutoCal Instructions v0.6 User Manual
Page 15
Page
Lingenfelter Performance Engineering
1557 Winchester Road
Decatur, IN 46733
(260) 724-2552
(260) 724-8761 fax
www.lingenfelter.com
LPE EFILive AutoCal instructions v0.6.indd
A full list of EFI live error codes are available in a PDF document that is downloaded to your
PC as a part of the EFILive version 8 software package. If an error code occurs while using
the AutoCal, refer to the PDF “EFILive Error Codes” for a description of the problem and
possible solutions. After downloading EFILive version 8, this PDF document can be found
here:
For Windows XP:
Start > All Programs > EFILive > V8 > Documents > EFILive Error Codes
For Windows Vista / 7:
Start > Programs > EFILive > V8 > Documents > EFILive Error Codes
For additional product installation information and technical support, contact LPE or your LPE
products distributor. You can also find technical support and usage discussions regarding
this product and many other LPE products in our Internet forums:
http://www.lingenfelter.com/LPEforumfiles
12. A 15 second countdown will commence at
this time. When the countdown ends, the
programming of the ECM is complete and the
vehicle can be driven.
NOTE: In some applications, it may be
necessary to program both the ECM (Engine
Control Module) and TCM (Transmission
Control Module).
14.