Lingenfelter EFILive AutoCal Instructions v0.6 User Manual
Page 10
Page 9.
8. The illustration below shows the lower half of the EFILive Explorer home screen. With the
AutoCal already connected to the computer, the program will automatically open the contents of
the EFILive AutoCal, as shown by the red arrow below.
9. Click on the “Read” folder to open the
contents. In the main window, you should
now see up to 5 different files. These are
the stock calibrations that have been saved
to the AutoCal. Click on the desired stock
calibration and drag it onto your desktop.
Once the data log has been placed on the
desktop, it can now be attached to your email
client and sent to LPE.
NOTE: Trying to drag a calibration file
directly from EFILive Explorer to your email
client will result in a faulty calibration file that
cannot be read by the EFILive software.
7. Double-click on the EFI Explorer desktop
icon to open the EFILive Explorer computer
program on your PC.
NOTE: You must have EFILive v8.1 installed
to use the EFILive Explorer program. Refer
to step 3 of the “Copying Logged Data from
the Handheld Device to a PC” section of these
instructions on page 5 for a link to download
the latest EFILive software.