Imaxrc B606-AC-PRO - Manual (Page 11)

According to press key you can inquire the individual voltage of each batteries and final voltage
etc. continually as follow (this need to connect the balance plug):
Dec./Inc.
You can check the individual voltages of each cell in the battery pack while using the
individual connection cable to the battery.
The final voltage will be reached at the end of process.
You can inquire the safety capacity.
You can inquire the safety time.
You can use the 3-pin port as an USB port or inquire the safety temperature value.
It show you the external temperature when the temperature sensor is connected you can
inquire
This shows the present voltage of input power

4.20 4.20 4.20
0.00 0.00 0.00
End Voltage
AUTO CHK
Capacity Cut-off
ON 5000mAh
Safety timer
ON 120min
USB/Temp Select
Temp Cut-off 80C
EXT.Temp 0C
IN Power VOLTAGE
12.60V
Inc.
Dec.
Dec.
Dec.
Dec.
Dec.