FeiYu Tech Panda Autopilot - Manual (Page 39)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 38
d) Save the waypoints
At last, don‘t forget to click this button to save
，otherwise the setting waypoints will be
lost if power down.
Instant Waypoint flying setting
The aircraft can fly to other temporary waypoints, when carry out instant waypoint flying
operation. To enter instant waypoint flying, autopilot should work in stability, path navigation,
RTH or circling mode. When switch to instant waypoint flying mode, you should work in auto
mode (path navigation, RTH or auto circling), because this switch must be via GCS. After ending
instant waypoint flying, the autopilot will carry out those tasks which are interrupted before.
Click the waypoint editing button , when it turn green, meaning you can
edit the waypoint. Click , and make it turn green, it means you have
entered Mouse Click point mode. That is to say, switch the path navigation mode to instant
waypoint flying mode. Choose ―edit target waypoint‖ in .When this
button turn green, depress the ―Ctrl‖ key and click the target point in the map when ready, then
an icon will appear , it means you have uploaded successfully.
The ―Target Point‖ icon will appear , which gives your aircraft the point to fly to.
Instant Waypoint flying cancel: click the button , when it turns green,
meaning you have quitted the instant waypoint flying mode and performed other tasks.