Austin Hughes IPM-02 - Manual (Page 31)

www.austin-hughes.com UM-IPM-02-Q414V3 P.26
In < Details >,
- Change “ Name ” and “ Location ” of PDU & Click “ Apply ”
- Change “ Alarm amp. ” , “ Rising alert amp. “ & “ Low alert amp. ” of PDU’s circuits
& Click “ Apply ”
- Click “ Reset ” to reset peak amp. or kWh of PDU’s circuits
- Click “ ON / OFF ” to swich ON / OFF outlet ( WS kWh Switched PDU only )
- View On / Off status of each PDU’s outlet
- View aggregated current on the PDU
Part IV. Software Usage & Operation