Austin Hughes IPM-02 - Manual (Page 14)

www.austin-hughes.com UM-IPM-02-Q414V3 P.9
Horizontal IP dongle installation steps :
- fi x the IP dongle on the rear side of rackmount PDU with 4 screws
- plug the RJ-45 connector of IP dongle into the LINK port of the 1st level PDU meter
- use the CAT. 5 / 6 cable to connect IP dongle to network device
< 1.5 > IP dongle installation & connection
IP dongle for rackmount PDU
Model :
IPD-H02-S ( with SNMP feature )
To LINK port
of the 1st PDU
Rear side of rackmount PDU
IP dongle
To LAN port
of IP dongle
Network Hub