Interlogix TVE-DEC10 - Manual (Page 26)

22 TVE-DEC10 IP Video Decoder User Manual
Option Description
Subnet mask Enter the subnet mask for your network so the decoder will be
recognized within the network.
Default value is 255.255.255.0.
Gateway address Enter the IP address of your network gateway so the decoder
will be recognized within the network. This is typically the IP
address of your router.
Default value is 0.0.0.0.
DNS server Enter the domain name server to use with the decoder. Default
value is 0.0.0.0.
3. Click Save to save the settings.
Alarm input settings
The decoder can be configured on how it will respond when an alarm input is
triggered by
an external alarm device (for example, PIR detector, dry contacts…).
To set up alarm inputs:
1. Click Configuration > Alarm Input Settings. The Alarm Input Settings
window appears.
2. For Alarm Input, select the alarm input number of a camera.
3. For Alarm Mode, select the alarm input type: Normally Open or Normally
Closed.
4. Under Alarm Input Handling , check one or more of the desired response
methods: Alarm output 1, Alarm output 2.
5. Click Save to save settings .
To set up an alarm output:
1. Click Configuration > Alarm Output Settings. The Alarm Output Settings
window appears.