Interlogix TVE-DEC10 - Manual (Page 12)

8 TVE-DEC10 IP Video Decoder User Manual
Using a web browser
You can configure the decoder over the network with a web browser. The
supported web browsers include:

Internet Explorer 6/7/8/9

Firefox 3.5 and above

Chrome 8 and above

Safari 5.0.2 and above

Windows XP SP1 and above (32-bit)
Before you start

Before accessing the browser, you need to configure the network settings of
the decoder.

Connect the decoder to the LAN, and connect a computer to the same LAN
as the decoder.

The
decoder’s factory default user name is admin and the password is 1234.

The
decoder’s factory default IP address is 192.168.1.70.
Accessing the web browser
Figure 6: TVE decoder main page
1. Decoding Operation: Configures decoding resource, decoding mode and video output. See
chapter “Decoder operation” on page 10.
2. Configuration: Configures device settings, network parameters, alarm and user account.
See chapter “Configuration” on page 19.
3. Device management: Upgrades firmware, restores factory default settings, and reboots the
decoder . See chapter “Device management” on page 26.