Interlogix TVE-DEC10 - Manual (Page 17)

TVE-DEC10 IP Video Decoder User Manual 13
2. Select the channel for playback from the Decoding Channel drop-down list.
3. Under Device Properties , enter the channel parameters:
Remote host IP address: Enter the IP address of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host channel: Enter the channel number of the encoding device to
be decoded.
User ID/password: Enter the user name and password used to log into the
encoding device.
Remote playback by file: Enter the file name of the file to be played back
from the DVR. This is found from a search of the stored files on the DVR.
Remote playback by time: Enter the start and end time of the file to be
played back.
4. Click Save to save the settings .
5. Click to start playback.
Control playback by using the buttons on the toolbar .
Click to start, stop, slow forward, fast forward and turn audio on/off
respectively.
Slow forward is 1/2X, 1/4, 1/8X and 1/16X. Fast forward is 2X, 4X and 8X.