Interlogix TVE-DEC10 - Manual (Page 24)

20 TVE-DEC10 IP Video Decoder User Manual
2. Enter the device name.
The other options are read-only:
Mac address: View the MAC address of the decoder. It is unique and cannot
be changed.
Device type: View the decoder model name.
Device SN: View the decoder serial number.
Firmware version: View the firmware version number installed in the
decoder.
DSP version: View the software version number used in the DSP.
3. Click Save to save the settings.
Time settings
You can set up the decoder to use a Network Time Protocol (NTP) server to
keep the date and time current and accurate or manually select the local time
zone.
Note: If the decoder is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44) or europe.ntp.pool.org. If the
encoder is set up in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization.
To set up the decoder properties:
1. Click Configuration > Time Settings. The Time Settings window appears.