Interlogix TVK-800 User Manual

Page 34

TVK-800 User Manual

3. Modify the device name. Click

Modify

to accept the changes.

Note: The user name and password refer to those required to log in to the device
from the keypad.

Delete a device

1. In the Main menu, click

Device

. The “Device-Device List” window appears.

2. Select the device to be deleted. Click

3. Click

Yes

in the pop-up window to confirm the deletion.

Remotely control a DVR/NVR

You can remotely control a DVR or NVR through the keypad. There are two ways to
remotely control a device:

• Use the remote panel of the keypad.
• Use the MON key to connect directly to a DVR/NVR. This method may be easier to

use when there are several DVRs/NVRs connected to the keypad.

You can call up a specific output DVR or NVR by entering its output device number
and pressing the MON key. The output device number associated with a DVR or
NVR is shown in the “Output Settings-Output List” window (see “Output settings” on
page 38 for more information). A DVR or NVR can have a maximum of two monitors
connected to it. See Table 5 for an example on how to call up the desired monitor of
a DVR accessible by the keypad.

Table 5: Example of how to access a DVR monitor

Keypad keys to press

DVR

Monitor

#1 MON

#2 MON

#3 MON

#4 MON

Note: Not all DVRs/NVRs support remote control.

To remotely control a DVR/NVR using the keypad MON key:

1. Press the

Num

MON

keys to call up the monitor of the desired DVR or NVR.

The Shortcuts window appears.