Interlogix TVK-800 User Manual

Page 27

TVK-800 User Manual

2. Enter the port, IP address, subnet mask, default gateway values.

- Or -

Check the

DHCP

box. Ensure that you have a DHCP server on your network

before selecting this option.

3. Click

Apply

4. Click

Return

to return to the Main menu or click another Keypad menu option.

Hardware settings

1. In the Main menu, click

Keypad

Hardware Settings

. The “Keypad-Hardware

Settings” window appears:

2. Enter the desired value for each parameter:

Parameter

Description

1. Key tone

Key makes a beeping noise when pressed.

Enable or disable the option.

2. Audio warning

Keypad emits warning if the network cable is disconnected.

Enable or disable the option.

3. Key light

Keypad keys are lit red or blue to show if active or locked.

Enable or disable the option.

4. Lock the keypad

Set a timer so that the keypad automatically locks itself after
a defined period of inactivity.

Select a time between 0 and 10 minutes of inactivity.

5. Turn off the screen

Set a timer so that the keypad screen automatically turns off
after a defined period of inactivity.

Select a time between 0 and 10 minutes of inactivity.

6. Transparency

Set the transparency level between the decoded video and
the menu. It only applies to local live view.

There are four values to select: 1:1, 3:1, 1:3, or Not
transparent.

7. Mouse speed

Set the mouse speed.

Select a level between 0 and 2.

8. Brightness

Set the screen brightness.

Select a level between 0 and 3.